70 Watt Metal Halide to LED Equivalent

By LEDaBulb Editorial Team • Updated November 12, 2026

As an Amazon Associate, we earn from qualifying purchases. Recommendations never depend on commission rates.

Affiliate Disclosure: When you buy through our links, we may earn a commission at no extra cost to you. That supports our specification database and calculators.

Selection Methodology: Picks come from verified manufacturer data sheets, certification databases (DesignLights Consortium QPL for commercial fixtures, California Title 24 JA8, FTC Lighting Facts, and EPA ENERGY STAR for recessed downlights), and owner failure-rate analysis. We do not run hands-on lab tests.

Replacing a 70W Metal Halide lamp with a 25–35W LED (~4,000 delivered lumens) cuts electricity use by 67% while extending rated life to 25,000–50,000+ hours.

Quick answer: A 70W Metal Halide fixture draws roughly 90W with its ballast (5,600 initial / 4,000 mean bare-lamp lumens). Replace it with a 25–35W LED delivering roughly 4,000 directional white lumens — cutting electricity use by 67% (~$34.16/year per fixture at $0.13/kWh).

70W Metal Halide equivalent
~4,000 lumens · 67% less energy
$34.16 Saved / yr
$171 5-yr total
263 kWh Energy / yr
Lumie
Lumie's Tip: Metal halide loses 30–40% of its initial lumens quickly; LED replacements hold steady output for 50,000+ hours and restrike instantly after power dips.
Check Prices for 25–35W LED Replacements on Amazon →

Energy Savings Calculation

Current Bulb System 90 Watts (with ballast)
LED Replacement 25–35W
LED Target Output ~4,000 lm (delivered)
LED Efficacy 133.3 lm/W
Annual Energy Saved 263 kWh / yr
Annual Dollar Savings* $34.16 / yr
Commercial Facility Savings (25 Units) $854.10 / yr
50,000-Hr Commercial Life Savings $390.00

*Based on 12 hrs/day at $0.13/kWh. System wattage includes ballast load.

Recommended Replacements

Brand-vetted options matched by base type, output, and application for replacing a 70W Metal Halide lamp.

Economy Choice
Sunco / Sylvania 30W Type B LED Corn Bulb (E26 / E39)

Sunco / Sylvania 30W Type B LED Corn Bulb (E26 / E39)

Lowest upfront hardware cost when your existing housing and lens are still in good shape. Requires bypassing the old ballast and ignitor.

Power: 25–35W Delivered: ~4,000 lm Base: E26 / E39 Wiring: Type B Bypass
Check Price on Amazon →
Best Value / ROI
Sunco 50W Dusk-to-Dawn LED Wall Pack / Barn Light

Sunco 50W Dusk-to-Dawn LED Wall Pack / Barn Light

Full-fixture outdoor replacement with built-in photocell, wet-location sealing, and directional downward optics.

Power: 50W Lumens: ~4,000 lm Voltage: 120–277V Warranty: 5 Years
Check Price on Amazon →
Premium / Pro
RAB Lighting / Lithonia 50W DLC Commercial Fixture

RAB Lighting / Lithonia 50W DLC Commercial Fixture

Spec-grade commercial luminaire built for 12–24 hr operation, surge protection, and utility rebate qualification.

Rating: DLC Listed Surge: 4–6kV IP Rating: IP65 Wet Warranty: 5 Years
Check Price on Amazon →

Engineering Analysis: 70W Metal Halide to LED Commercial Retrofit

Upgrading 70-watt Metal Halide fixtures (~90W system draw) to 25–35W LED cuts lighting load by 67%, delivering rapid payback on 12-to-24 hour commercial schedules.

1. Bare-Lamp Rating vs. Delivered LED Lumens (~4,000 lm)

A 70W Metal Halide lamp starts near 5,600 initial lumens, then depreciates to roughly 4,000 mean lumens (29% lower) over its operating life while still drawing full power. Sizing your LED replacement to ~4,000 delivered lumens (25–35W) matches or exceeds real-world working illuminance across a 50,000-hour L70 rating.

2. Eliminating Ballast Losses

HID lamps require a ballast (and on HPS/pulse-start MH, an ignitor) to strike and regulate the arc. On a 70W Metal Halide fixture, ballast losses add roughly 20W (29%), bringing true wall draw to ~90W. Switching to an integrated LED luminaire or Type B ballast-bypass lamp drops meter draw from ~90W to 25–35W.

3. Commercial Facility Savings (12 Hrs/Day at $0.13/kWh)

Operating 12 hours per day, 365 days per year (4,380 hours/yr):

4. Primary Applications for 70W Metal Halide Retrofits

Commonly installed in retail accent and track lighting, jewelry and display cases, and low-ceiling commercial downlights. Physical lamp specification: ED17 with an E26 medium base, PAR30/PAR38 reflector lamps, or T6 ceramic metal halide capsules (G12 base).

A 70W MH system pulls about 90W with its ballast. A 25–35W LED replacement removes the ballast hum and the warm-up and restrike delays.

Bypassing the ballast also removes a component that would otherwise need replacing as the fixture ages.

Quick Reference: 70W Metal Halide Lamp vs. LED Replacement

Spec70W Metal Halide lampLED replacement
ANSI ballast codePulse-start (read the M-code on the ballast label)None (ballast removed / new fixture)
Bulb & baseED17 with an E26 medium base, PAR30/PAR38 reflector lamps, or T6 ceramic metal halide capsules (G12 base)Type B corn bulb or integrated LED fixture
Light output5,600 initial / 4,000 mean bare-lamp lm~4,000 delivered lm
Power at the meter~90W including ballast25–35W
Color~3,700–4,200K, CRI ~65–70 (CMH: 80–90+)3000K–5000K, CRI 80–90+
Rated life10,000–15,000 hours, varies by lamp50,000+ hours (L70), typical
Warm-up / restrike2–5 min warm-up / 10–15 min restrikeInstant

What's Specific to the 70W Metal Halide Retrofit

Ceramic metal halide sets a high color bar

Much of the 70W metal halide in stores is ceramic metal halide (CMH), chosen for its CRI of 80–90+. If you are relighting merchandise, artwork, or food, a standard CRI 80 LED will look like a downgrade. Choose CRI 90+ and match the color temperature of the lamps you are replacing.

Beam angle matters more than lumens

In track and accent lighting, what counts is the light that lands on the display. A directional LED PAR or track head puts nearly all of its output into the beam, so a lower-lumen LED with the right beam angle (roughly 10–25° spot, 25–40° flood) often looks as bright on target as the lamp it replaces.

No more mismatched tints

Metal halide lamps drift in color as they age and vary from lamp to lamp, which is why a row of display lights often shows slightly green, pink, or blue tints. Buying all your LED replacements at once, from the same product line, keeps the color consistent across the row.

Sizing From Delivered Light (Worked Example)

HID catalog lumen ratings measure the bare lamp in 360 degrees, whereas IES LM-79 LED fixture ratings measure net light exiting the complete luminaire.

Example: targeting ~2,800 delivered lumens from an integrated LED luminaire operating at 140 lm/W requires roughly 20W — compared with ~90W on the existing 70W Metal Halide ballast circuit. For critical roadways, sports poles, or high-bay aisles, verify spacing with the manufacturer's IES photometric file.

5. Commercial Installation: Type B Ballast-Bypass Protocol

When retrofitting an existing housing with a Type B (ballast-bypass) LED lamp rather than replacing the whole fixture:

  1. Lock Out Power: Shut off and lock out the branch circuit breaker at the panel, then verify zero voltage at the fixture.
  2. Bypass the Ballast: Disconnect incoming line and neutral leads from the old ballast (and disconnect any ignitor and capacitor — leaving an HID ignitor in circuit sends multi-kilovolt pulses that will destroy an LED driver).
  3. Check Sockets & Wire Direct: Connect line voltage (typically 120–277V) to the lamp socket leads per the LED manufacturer's wiring diagram.
  4. Apply the Retrofit Label: Place the included modification sticker inside the luminaire housing warning future technicians that the ballast has been bypassed and legacy Metal Halide lamps must not be installed.
CRITICAL ELECTRICAL WARNING: Never wire a Type B direct-wire LED lamp through an active ballast or ignitor, and always verify branch circuit voltage (120V, 208V, 240V, 277V, or 347–480V) against the LED driver's input rating. Commercial 277V/480V work should be performed by a licensed electrician.